Condenser Welding Machine , DJ-G15

DJ-G15

1. Condensed type just needs 1/10-1/30 current if it is compared with alternative current type. It can make use of the power efficiently. It is a power-saved type welding machine.
2. Very less hot warp and oxidization save the processing in follow-up steps.
3. Stability：Less welding tolerance conforms to JIS vehicle specifications.
4. Economy：The consuming parts such as copper electrode is very less, and power consumption is very less. It reduces the operation cost.
5. Durability：The pressure adding device and the semiconducting charge and the discharge circuits are considered to kiip their superiority.
6. The key components are imported from Europe, the USA and Japan. Among them, the pneumatic components are made in Japan, and SCR (Silicon Controlled Rectifier) is a product made in Europe, the USA or Japan. The condenser is same as the condenser used in Japanese.
7. Machines. It is a storage type condenser for special use on instant charge and discharge. The control system is made of the USA or Japanese components.

In addition to above features, the non-iron metal and the different kind of metal can be soldered together. It doesn't need auxiliary material, but increases efficiency ifit is compared with the conventional method of rivet and solder. It is very helpful for the enterprise to save material charge and the salary.

Discharge Pour Power Control Circuit Layout

The principle of condensing type resistor Welding machine
As Figure 1 shown, store the power needed for welding into the condenser. Then, discharge this power instantly into the welding container. It will discharge a large welding current. It is like to pump the water from a well to a bucket. The , pour the water suddenly from the bucket.
Therefore, it just needs one tenth or less current to finish the work if it's compared with the alternative current type welding machine.Besides, the current of instant electricity discharge can be used efficiently. Its heat efficiency is better than other welding types.
The condenser can be charged 475V maximum. The charge voltage can be adjusted to meet the need of welding current. The charge voltage is controlled by semiconductor, so the charge voltage is not changed even if the voltage is unstable. You just need to set one time, and always have a fixed welding current for the welding needs.

Model	Rated Capacity	Rated frequency	Input voltage	Rated force	Electrode pressure	Cooling water
Specification	KVA	HZ	V	WS	Kgf	l/min
DJ-G05	0.5	50/60	220	300	10	AIR
DJ-G10	1.0	50/60	220	500	90	AIR
DJ-G15	1.5	50/60	220	750	150	AIR
DJ-G30	3	50/60	220	1500	250	3
DJ-G50	5	50/60	220	2500	300	3
DJ-G70	7	50/60	220	3500	500	3
DJ-G90	9	50/60	220	4500	500	5
DJ-G110	11	50/60	220	5500	800	5
DJ-G150	15	50/60	220	7500	800	6
DJ-G200	20	50/60	220~440	10000	1000	6
DJ-G250	25	50/60	220~440	12500	1200	7
DJ-G300	30	50/60	220~440	15000	1400	8
Suitable for worldwide voltage, design & making according to local need. The machine shape is designed as per workpiece, ensuring its funcition. The capacity won't change.