Model : DJ-WT5

  • Description
  • Specification
  • 1.Use Japanese style Controller for DJ8-SEAM welding with microcomputer LCD panel controller can memorize 30 sets welding conditions, Each discharge pulse parameters can be set independently, Material thickness is set to follow the current size, Have secondary constant current control and current compensation, After using the Seam Welder, the surface of the welding on the BODY of the Water Tank is prefect and it is ensured with stable quality of our Welding machine. Needs the stable Factory electricity.
  • 2.Germany's Siemens Continuously variable Hydraulic motor and gear-type constant flow pump drive, Welding speed stability than conventional DC motor drive.
  • 3.Japanese, Silicon steel Main transformer Voltage regulator And secondary Conductive copper, Current output in Long time welding with the High stability.
  • 4.Electricity Main circuit Japan's Mitsubishi thyristor switch SCR system. (Made in Japan), All Weather in use won't be hot.
  • 5.Copper Alloy Welding Elecrrodes, Imported from Japan, With a high condustivity, with the low consumption.

Automatic Air Pressure Vertical Seam Welder - Machining

  1. Voltage: 380V/50Hz/Ø1 (according to the demand of customers)
  2. Rated capacity: 150KVA
  3. Max.pressure: 1000KG
  4. Welding capacity: below able to 1.0+1.0 mm stainless steel
  5. Cooling water: 50L / MIN
  6. Electrode opening distance: 190mm
  7. Upper copper alloy wheel ( Made In Japan ): Ø250 * 12t
  8. Lower copper alloy wheel ( Made In Japan ): Ø200 * 12t
  9. Machine deep throat: 1600mm
  10. Import electrical motor
  11. Import thyristor switch (SCR)
  12. Constant current microcomputer seam welding controller
  13. Cooling: external cooled
  14. Pressurized cylinders: two-stage opening
  15. Accessory: dedicated toolbox *1 set
Back to List
CLOSE